AT EACH FUEL FILL
- Check the engine oil level and add the proper oil if necessary.
- Check the engine coolant level and add DEX-COOLŪ coolant mixture if
necessary.
- Check the windshield washer fluid level in the windshield washer tank
and add the proper fluid if necessary.
AT LEAST ONCE A MONTH
- Make sure the safety belt reminders light and all your belts, buckles,
latch plates, retractors, and anchorages are working properly.
- Look for any other loose or damaged safety belt system parts. If you
see anything that might keep a safety belt system from doing its job, have
it repaired. Have any torn or frayed safety belts replaced.
- Look for any opened or broken air bag coverings, and have them
repaired or replaced.
- Inspect wiper blades for wear or cracking. Replace blade inserts that
appear worn or damaged or that streak or miss areas of the windshield.
- Silicone grease on weatherstrips will make them last longer, seal
better, and not stick or squeak. Apply silicone grease with a clean cloth.
During very cold, damp weather, more frequent application may be required.
- Check the transaxle fluid level; add if needed.
SIX MONTH CHECKUP
- Inspect the front and rear suspension and steering system for damaged,
loose, or missing parts, signs of wear, or lack of lubrication.
- Inspect the power steering lines and hoses for proper hookup, binding,
leaks, cracks, chafing, etc.
- Clean and then inspect the drive axle boot seals for damage, tears, or
leakage. Replace seals if necessary.
- Inspect the complete exhaust system. Inspect the body near the exhaust
system. Look for broken, damaged, missing, or out-of-position parts as
well as open seams, holes, loose connections, or other conditions which
could cause a heat buildup in the floor pan or could let exhaust fumes
into the vehicle.
- Inspect the hoses and have them replaced if they are cracked, swollen,
or deteriorated. Inspect all pipes, fittings, and clamps; replace as
needed.
- Clean the outside of the radiator and air conditioning condenser. To
help ensure proper operation, a pressure test of the cooling system and
pressure cap is recommended at least once a year.
- Inspect the throttle system for interference or binding, and for
damaged or missing parts. Replace parts as needed. Replace any components
that have high effort or excessive wear. Do not lubricate accelerator or
cruise control cables.
- Inspect brake lines and hoses for proper hookup, binding, leaks,
cracks, chafing, etc. Inspect disc brake pads for wear and rotors for
surface condition. Inspect other brake parts, including calipers, parking
brake, etc. Check parking brake adjustment. You may need to have your
brakes inspected more often if your driving habits or conditions result in
frequent braking.
ANNUAL CHECKUP
- Lubricate the key lock cylinders with the lubricant.
- Lubricate all hood hinges, hood latch assembly, secondary latch,
pivots, spring anchor, release pawl, door hinges, rear compartment,
glove box door, console door and any folding seat hardware. More
frequent lubrication may be required when exposed to a corrosive
environment.
MAINTENANCE SCHEDULE (Recommended)
Services
Interval - miles or months
whichever occurs first.
Description
-
Automatic Transaxle Fluid and Filter Replacement
Not required.
Change both the fluid and filter.
-
Chassis Lubrication
Every 7500 miles or 12 months.
Lubricate suspension and steering linkage. Lubricate the Transaxle shift
linkage, and parking brake cable guides, underbody contact points and linkage.
-
Engine Oil and Filter Change
Every 7500 miles or 12 months.
Change engine oil and filter.
-
Tire Rotation
At 7500 miles and every 15000 miles.
Check tires for uneven wear or damage. If irregular or premature wear is
apparent, check wheel alignment.
-
Air Cleaner Hoses, Ducts and Valves Inspection
(3.1L code D engine only)
Every 30000 miles.
Inspect & replace if necessary.
-
Cooling System Service
Every 30000 miles or 24 months.
Drain, flush and refill system with new coolant. Inspect hoses, clean
radiator, condenser, pressure cap and neck. Pressure test the cooling system and
pressure cap.
-
Engine Air Cleaner Filter Replacement
Every 30000 miles.
Change air cleaner filter.
-
Spark Plug Replacement
Every 30000 miles.
Change spark plug.
-
Engine Accessory Drive Belt Inspection
Every 60000 miles.
Inspect the belt(s), for cracks, fraying, wear and proper tension. Replace
as needed.
-
Engine Timing and Distributor Check
(3.1L code D engine only)
Every 60000 miles or 60 months.
Inspect the inside and outside of the distributor cap and rotor for cracks,
carbon tracking and corrosion.
-
Exhaust Gas Recirculation (EGR) System Inspection
(3.1L Code D engine only)
Every 60000 miles or 60 months.
Inspect EGR system.
-
Fuel Tank, Cap and Lines Inspection
Every 60000 miles or 60 months.
Inspect fuel tank, cap and lines for damage or leaks.
-
Spark Plug Wire Inspection
Every 60000 miles.
Inspect spark plug wires.
|